RH-sensor technology measures moisture content and only moisture content.
The upgraded heater allows for more control over a wider range of testing temperatures.
Detect as few as 10 micrograms (0.00001g) of water and determine moisture content as low as 10ppm.
Test samples in different sized vials without exposing them to ambient air.
The brand new touch screen and intuitive user interface help eliminate potential sources of operator error.
|Moisture Range:||10 ppm (10 μg | 0.001%) to 100%|
|Moisture Resolution:||1 ppm (0.1 μg | 0.0001%)|
|Repeatability:||<10% C.V. for samples >0.1% moisture
<15% C.V. for samples <0.1% moisture
*dependent on sample properties
|Temperature Range:||25°C to 300°C, controlled to ±1°C of set point|
|Sample Size:||0.01 g (10 mg) to 8 g|
|Results:||% moisture, ppm moisture, µg water|
|Memory:||Stores of up to 250 test programs, last 1000 test
results and last 100 test graphs
|Statistical Analysis:||Mean, SD, CV|
|Ending Criteria:||User adjustable: Prediction, Rate, Time, Time then Rate|
|Calibration:||Manual calibration with NIST traceable capillary tubes|
|Power Requirements:||100-120 V~, 50/60 Hz, 8 A maximum
220-240 V~, 50/60 Hz, 4 A maximum
40 W with oven heat off
|Dimensions:||6.8″ H x 18.5″ W x 11″ D
(17.2 cm W x 47 cm H x 27.9 cm D)
|Weight:||17.7 lbs. (8 kg)|
|Warranty:||Two years, factory parts and labor (one year international)|
|Rear Panel Connections:||USB A and B, ethernet, serial port, carrier gas input and output|
|Carrier Gas:||Dry nitrogen or dry air (-40°C dew point or lower is suggested)
at 17-22 psi (user supplied)
|Touchscreen:||LCD 800 x 480 Color TFT|
ZERO Chemical Reagents: The Vapor Pro ® XL (VPXL) offers water-specific moisture analysis that correlates well with Karl Fischer without the hassle or expense of hazardous chemical reagents, costly glassware or time-consuming maintenance.
Versatile: The VPXL is ideal for any application in which KF titration is used. From plastics to petroleum products, pharmaceuticals to chemicals, the VPXL is the perfect fit for your application.
Touchscreen: The Computrac Vapor Pro XL features a brand new color LCD touchscreen and an intuitive interface that require minimal training or existing knowledge base to operate. Everything is menu driven so that you’ll get accurate results regardless of who runs the test.
High Temperature Testing: The VPXL’s upgraded heater increases the upper limit for testing temperatures to 300°C, allowing for improved control over testing temperatures and making it ideal for testing high temperature engineering plastics like PEI and PEEK.
Stepped Temperature Testing: The Vapor Pro XL offers stepped temperature testing capabilities with improved temperature control that make method development easier than ever before.
Multiple Sample Vial Sizes: The VPXL is compatible with crimp top vials from 2R to 30R, allowing users to test hygroscopic samples such as lyophilized pharmaceuticals without exposing them to ambient humidity.
Flexible Ending Criteria: The Computrac Vapor Pro XL offers user-adjustable ending criteria of prediction, rate, time and time then rate to optimize performance and test results.
Data Storage: The VPXL stores up to 250 test programs and retains the last 1000 test results and last 100 test graphs, enabling users to view and select past test results for statistical analysis and test a variety of samples with ease.
Built-In Self Diagnostics: The Vapor Pro XL features built-in self-diagnostics that routinely monitor system conditions and report abnormalities in the hardware, software, moisture sensor and flow system.
Web Server: An optional web server allows users to download calibration reports, view what is currently on the screen, download the audit log, and upload and download test programs, results and graphs.
ASTM & Regulatory Compliance
21 CFR Part 11 Compliant (optional): Meet regulatory compliance standards for pharmaceutical and medical device companies.
ASTM D7191-10: Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
ASTM D7546-15: Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
It also correlates well with popular methods, including: ASTM D6304-16, D6869-03, D1364-02, D4017-02, D4928-12, E1064-16, D5530-15 and D4672-12.
|21 CFR||21 CFR, Part 11 Compliant|
|Y990-0082||ZSP-150 Digital Balance with Cable and Communications Software 115 VAC|
|Y990-0142||Temperature Calibration Kit 115 VAC|
|Y990-0143||Dry Air Generator Kit 115 VAC|
|Y990-0212||Color Printer Kit|
|Y990-0249||Technology Transfer Package|
|Y990-0252||Black & White Mini Printer Kit|
|Y990-0266||Hydrophobic Filter Kit with Fittings|
|Y990-0267||Hydrophobic Filter and Tube|
|Y990-0269||IQ/OQ/PQ Validation Package|
|Y990-0271||Small Crimp Vial Kit|
|Y990-0272||Large Crimp Vial Kit|
Parts & Consumables
|345-0050||Clear Tubing 1/8″ x 1/4″|
|990-0150||1.0 μL Microcaps Pipette (box of 100)|
|990-0206||Metal Cap; High 24/400 Steel|
|990-0229||High Temperature Sample Bottles|
|Y990-0116||Inline Desiccator Kit|
|Y990-0206||Septa and Caps Kit|
|Y990-0226||Bottle Testing Assemblies Kit|
|Y990-0270||Needle Replacement Kit|